Features

The IncuSafe MCO-170AC CO2 Incubator was developed utilizing advanced technology for unprecedented temperature and CO2 control. Chamber conditions are accurately maintained by the Microprocessor P.I.D controller. The DHA Direct Heat & Air Jacket was designed to surpass the performance of the traditional water jacket and eliminates the inconveniences of using water. Start-up simple and easy with the automatic set-up function.

Copper-enriched Stainless Steel Kills Mycoplasma

PHCbi is proud to announce that InCu saFe, the copper-enriched stainless steel used in the interior of its CO2 and O2/CO2 incubators, kills mycoplasma. Mycoplasma is one of the most common causes of contamination found in cell culture and the source can often be traced back to contaminated laboratory apparatus. The inCu-saFe walls and shelves inside IncuSafe CO2 and O2/CO2 Incubators eliminate mycoplasma and significantly reduce the risk of contamination without emptying the incubator.

Benefits

Features

  • Preventive Contamination Control
  • Ergonomic Design
  • Improved Temperature Stability with D.H.A. System
  • Automatic CO2 Cylinder Switchover System (optional)
  • Ergonomic Design
  • TC Sensor System
  • Double stacking
  • Single chamber
  • Active Background Contamination Control
  • Patented Direct Heat and AIR Jacket Heating System
  • PHCbi inCu saFe copper-alloy-stainless interior, shelves and plenum
  • Field-reversible Door
  • Water Level Sensor (Optional)
  • Automatic Gas Cylinder Switchover System (Optional)

Performance

Specifications

External Dimensions (W x D x H)620 x 710 x 900 mm
Internal Dimensions (W x D x H)490 x 523 x 665 mm
Volume170 liters
Net Weight92 kg
Temperature Control Range & FluctuationAT +5 ~ +50, ±0.1 °C
Temperature Uniformity±0.25 °C
CO2 Control Range & Fluctuation0 ~ 20, ±0.15 %
O2 Control Range & Fluctuation
Humidity Level & Fluctuation95, ±5 %RH
Sterilisation Method
Temperature SensorThermistor
CO2 SensorTC
O2 Sensor
Display 
Exterior MaterialPainted Steel
Interior MaterialStainless Steel Copper-Enriched Alloy
Insulation MaterialRigid polyurethane foamed-in place
Heating MethodDirect Heat & Air Jacket System
Outer Doors1
Outer Door LockIncluded
Field Reversible Door
Inner Doors1
Shelves 
Shelf Dimensions (W x D x H)450 x 450 x 12 mm
Max. Load Per Shelf7 kg
Max. Shelf Capacity15
Access Port1
Access Port PositionRear Upper Left
Access Port Diameter30
Power FailureR
Out of Temperature SettingV-B-R
High TemperatureV-B-R
Out of CO2 SettingV-B-R
Out of O2 Setting
Door OpenV
Power SupplyLocal
FrequencyLocal
Noise Level24 dB