The MCO-170AICD IncuSafe CO2 Incubator provides precise control of CO2 concentration and accurate, uniform, and highly responsive temperature control within the chamber. During cell culturing the inCu-saFe germicidal interior and SafeCell UV lamp work continuously to prevent contamination. The incubator’s Dual heat sterilisation utilises the incubator’s two heaters during the 180°C sterilisation process, which takes 11 hours. There is no effect on temperature inside stacked incubators due to low heat dissipation, cell culturing can continue uninterrupted.
Precise & Regulated Environment
InCu-saFe and SafeCell UV both function to prevent contamination. The direct heat system and melamine foam insulation ensure optimal temperature distribution throughout the chamber whilst the Dual IR sensor controls the CO2 level.
Dual Heat Sterilisation
Dual heat sterilisation utilises the incubator’s two heaters during the 180°C sterilisation process, which takes 11 hours.There is no effect on temperature inside stacked incubators due to low heat dissipation, cell culturing can continue uninterrupted. No need to remove inner parts or recalibrate after sterilisation, therefore laboratory processes are more efficient with less incubator downtime.
Simultaneous Use of Stacked Units
The melamine foam insulation limits heat dissipation during dry heat sterilisation. This means that cell culture can continue uninterrupted in incubators stacked with those actively running sterilisation.
Ease of Use & Maintenance
A full colour LCD touch-screen allows full control even with gloved hands. Transfer of data is easy via a USB port. The easy-to-clean incubator interior features fully rounded corners and integrated shelf supports.
Active Background Decontamination
The inCu-saFe copper-enriched stainless steel alloy interior offers the germicidal properties of copper and the durability of stainless steel. The optional, isolated, SafeCell UV lamp decontaminates circulating air and water in the humidifying pan, without harming cultured cells.
- Active Background Decontamination
- PID Control of CO2 and temperature
- Dual IR CO2 sensor
- Optimum protection for your cell culturers
- More space for more cultures
- Dual heat sterilisation has no effect on temperature inside stacked incubators due to low heat dissipation, cell culturing can continue uninterrupted.
- Direct Heat System
- Melamine Foam Insulation
- Dry heat sterilisation, 180°C, 11 hours
- Dual IR CO2 sensor
- InCu saFe copper-enriched stainless steel interior
- Optional SafeCell UV lamp (standard on the MCO-170AICUVD model)
- Integrated shelf supports
- Full colour LCD touch screen
- USB port
|External Dimensions (W x D x H)||620 x 755 x 905 mm|
|Internal Dimensions (W x D x H)||490 x 523 x 665 mm|
|Net Weight||79 kg|
|Temperature Control Range & Fluctuation||AT +5 ~ +50, ±0.1 °C|
|Temperature Uniformity||±0.25 °C|
|CO2 Control Range & Fluctuation||0 ~ 20, ±0.15 %|
|O2 Control Range & Fluctuation||–|
|Humidity Level & Fluctuation||95, ±5 %RH|
|Sterilisation Method||Dry heat sterilisation, 180°C, 11 hours|
|CO2 Sensor||Dual IR|
|Exterior Material||Painted Steel (rear cover not painted)|
|Interior Material||Stainless Steel Copper-Enriched Alloy|
|Insulation Material||Melamine resin foam|
|Heating Method||Heater jacket|
|Outer Door Lock||Standard|
|Field Reversible Door||Included|
|Shelf Dimensions (W x D x H)||470 x 450 x 12 mm|
|Max. Load Per Shelf||7 kg|
|Max. Shelf Capacity||10|
|Access Port Position||Rear Upper Left|
|Access Port Diameter||30|
|Out of Temperature Setting||V-B-R|
|Out of CO2 Setting||V-B-R|
|Out of O2 Setting||–|
|Noise Level||25 dB|