Heat Sterilization Models
Safe Cell UV Sterilization Models
Rapid H2O2 Decontamination
DUAL HEAT STERILISATION 180°C
Phcbi | CO2 Incubator with 180°C dry heat sterilisation
Automatic high heat sterilization CO2 incubator is designed for use in medical and government research, pharmaceutical and biotech applications. This dry heat incubator includes three methods of protection against cell culture contamination. In addition to inCu-saFe and SafeCell UV contamination control, an optional, manually initiated high heat sterilization cycle provides a 180°C (355°F) decontamination process without the need to remove incubator chamber components
SAFE CELL UV STERILISATION
Phcbi | Safe Cell UV Sterilisation
Patented SafeCell UV lamp
The SafeCell UV lamp in IncuSafe incubators plays a pivotal role in continuous decontamination.
To ensure the elimination of any airborne contaminants that may enter the chamber, the isolated narrow-bandwidth, ozone-free UV light (located at the base of the chamber) automatically switches on for a specified period after each incubator door opening. Water-borne organisms in the humidity water reservoir are eradicated in the same way, ensuring the security of any active cell cultures.
RAPID HYDROGEN PEROXIDE STERILISATION
Phcbi | H2O2 Sterilisation
PHCbi’s H2O2 system limits incubator downtime to less than three hours for each total chamber decontamination. Despite this increased speed, the high levels of safety needed to meet regulatory requirements are reliably retained. The quick turnaround of this process means that the equipment is out of action for substantially less time than similar direct heat decontamination systems.