Environmental Testing Chambers. Temperature and Humidity testing chambers for Aeronautics, Automative, Building Materials, R&D laboratories and Quality Control according to the highest quality and most demanding standards
ENVIRONMENTAL TESTING CHAMBERS
Aralab | Environmental Testing ‘reach-in’ chambers
Environmental testing chambers, ranging from 300 to 1500 litres of internal volume. Ideal solution for temperature and climatic testing, simulation and exposure to weather, temperature changes, humidity cycles, accelerated aging and stress testing


Aralab | Environmental Testing ‘walk-in’ chambers
When internal testing volume is a necessity, Aralab walk-in chambers for environmental testing applications will offer the performance and reliability you need. Volumes ranging from 8000 to 12000 liters.
TEMPERATURE TESTING CHAMBERS
Aralab | TestaTT 300 to 1500
Temperature control chambers ranging from 300 to 1500 litres of internal volume. Ideal solution for temperature testing, simulation and exposure to weather, temperature changes, aging and stress testing

Aralab | FitoTerm 8000 to 18000
When internal testing volume is a necessity, Aralab walk-in chambers for environmental testing will offer the performance and reliability you need. Volumes ranging from 8000 to 12000 liters in stainless steel interior and exterior
Models: Fitoterm Walk-In
Aralab |Temperature Shock chamber FitoTerm 150 CTE
The Temperature Shock test chamber ‘FitoTerm 150 CTE2’ has two independent (Hot/Cold) test spaces in the same chassis allowing ultra fast temperature changes to the test specimens by means of an interior lift.
METROLOGY AND CALIBRATION


Aralab | TestaCal 300
Powerful and precise chamber was developed specifically for temperature and humidity calibration. It is characterized by extraordinary uniformity and stability performances of the configured climatic conditions
TEMPERATURE & CLIMATIC CHAMBERS FOR SOLAR MODULES

Aralab | Temperature and Climatic chambers for solar modules
Range of climatic and temperature chambers with reach-in and walk-in dimensions, designed for solar photovoltaic panels testing compliant with IEC 61215 / 61646 / 62108 and EN 12975-1 / 12975-2 standards
CEMENT CURING CHAMBERS
Aralab | FitoClima 600 and 1200 PHCI Curing chambers
Specifically designed to prepare cement sample
Climatic chambers with temperature and high humidity ranges, built for testing the cure of concrete, cement and mortars.


CONTROLLERS & SOFTWARE
Fitolog Software
The FitoLog software suite is a set of applications designed to monitor and log data from the chambers processes variables. The software consists of 3 applications: FitoLog, FitoLogView and FitoProgram
Climaplus Touch-Screen Controller
Easy to use touch screen controller for management and monitoring of all conditions inside the chamber. Temperature, humidity or any other environmental factors are programmable with a simple touch at the chamber frontal panel.


Take a Closer Look INTO SOME OF ARALAB SOLUTIONS








